Sunday, December 19, 2010

Metal Carport Kits

Metal carport kits are the cheapest and easiest way of constructing a new carport. The kits come with full and detailed instructions and most can be constructed with a day or two using only the most basic of household tools. These pre-fab carport kits are generally made out of steel or aluminum and come with everything you will need to complete the construction process.
There are generally 2 basic types of metal carports. There are stand alone carports and car ports that attach to your house or another structure. Within these 2 general categories of carports there are some sub-categories that pertain to the type of roof. Those carports that are stand alone carports tend to have shed or gable roves. Those carports that attach to the house tend to be flat roof carports or single slope or lean to carports. All types of carports serve specific purposes and none are better than the others.
Metal carport kits are not just used to protect cars these days. People are using carports for all sorts of purposes. These days many lean to metal carports are used as awnings to cover front porches and side patios. It is only upon closer inspection that you even notice that these structures are actually carports. Metal carports that attach to the house also provide great covered play areas for children. With the addition of a small fence, these carports provide the perfect sheltered outdoor play area for children.
Stand alone metal carports can be used as a gazebo or picnic area shelter in your backyard or at your cottage. If a double carport is used then as many as 4 picnic tables can fit underneath the roof. In the alternative, a few picnic tables plus a BBQ area would comfortably fit underneath a double carport. The addition of some plain netting or screen can keep the mosquitos out. With the right protection from the elements, outdoor gatherings can proceed in any type of weather or conditions.
Of course it goes without saying, that carports of all types and sizes can also be used to protect vehicles from the elements. Metal carport kits most often come in one car or two car designs. There are also metal rv carports which are generally longer and higher than the average carport.
Good quality metal carports can last a lifetime and can really enhance the value of your house. These carports can serve multiple functions and accordingly can also really enhance the enjoyment you get out of your home and or the functionality of your home. Keep an open mind about the different ways a metal carport kit might be of benefit to your family.
John A. Moore regularly contributes to ezine. He writes about home renovations, patios, and water sports. You can read more at http://the-carport.blogspot.com/
See also a new carport kits with Metal Tile roofing sheets to match your tiled house roof at http://www.easytiledcarports.com.au/

more partner's sites: http://mystoryaustralia.com/

Sunday, November 28, 2010

Carports that match your tiled house roof.

Have you ever wondered if you could match yopur tiled roof with your new carport?
 
There is a solution.
 
Company Easy Tiled Carports Brisbane is specializing in manufacturing and supplying DIY Carport kits - perfect garages for your car Australia wide.
Thier range of steel Carport Kits are fully pre-manufactured for the easiest assembly and are supplied with Metal Tile Roof - new generation of roofing materials.

Metal Tile Roofing Sheets
The Metal Tiles are made of zinc coated roofing steel and polyester coated on top to keep the paint safe and last longer. They combine a great look of tiles with all the benefits of metal roof. Metal Tiles are strong, weather resistant, light weight, low maintenance and easy to install. The Metal Tile roofing sheets are coming in long run and have standard fixings with roofing screws.
 
Carports with Metal Tiles
 
Our carport kits with Metal Tiles are the new generation of prefab buildings and garages. They look great on any block of land - big or small, town or rural, commercial or industrial.
 
A carport with Metal Tiles will match your existing tiled house roof and make a complement to your property.
 
Our Carport kits are made only from best quality steel and represent best value for money. Click here to see more pictures.
 
 
 
Engineering and design
Our Carport kits are engineered with web roof truss system and designed the way you can install a ceiling and inclose the roof cavity turning it into a storage room and having a better finish and insulation inside.
 
Metal Tile Carport kits require only simple tools for the assembly because all the hard work is done at our factory.
We supply and deliver the Carport Kits in Queensland, New South Wales and Victoria.
 

Thursday, November 18, 2010

How To Choose Your Carport Kit

Just few usefull tips before you start the project of building of a carport.
1. Check you site for possible underground lines: sewer lines, power, water etc. Try to stay away from the sewer line for at least 2 m, if possible. Sometimes you can put the posts at 2 m from the sewer, but the carport may be overhanging over it.
2. Check the measurements of your future carport: width, length, make sure the site is square. For that check the measurements between the corners (diagonals). In a square (rectalgular) carport they should be equal. (Click here for our standard carport sizes.)
3. Check the height of your carport. The standard height is 2400 mm or 2700 mm. The height is usually measured from the ground to the ceiling. For a double carport the A-pex height is about 1200 mm (with pitch of 20 Deg)
4. Check if there is any power lines over the site. You might need to rase them before you start building the carport.
5. Choose the shape of the roof. The three most common shapes are: Gable (two side pitched roof), Hip (four sides roof) and Dutch Gable (a combination of a Hip and two Gables). Usualy the gable carport is a cheaper option - it is easier to manufacture and to install it. See more options at http://www.easytiledcarports.com.au/
6. Choose the posts for your carport kit. A double carport usually comes on 4 posts, but you can use more if required. Standard posts are galvanized 75 x 75 mm. For the Premium carports 100 x 100 mm posts can be used. Posts can be powder coated if required.
7. Your carport can be attached to your house via roof brackets of some other ways. Please consult your company representative if you would like more information about it.
8. Choose materials for the roof of your carport. We recommend to use Metal Tile roofing sheets supplied by Coroofs (http://www.coroofs.com.au/) to match the tiled roof of your house. See more information about Metal tile roofing sheets here.
9. If you need to see the carport kit assembly instruction click here.
10. If you have more questions, please contact our friendly representative to discuss your project and get a free quote for your carport.

Monday, November 15, 2010

DIY Carport Kits With Metal Tile Roof

Carports that match your tiled house roof.
 
Our Company Easy Tiled Carports Brisbane is specializing in manufacturing and supplying DIY Carport kits - perfect garages for your car Australia wide.
 
 
 
Our steel Carport Kits are fully pre-manufactured for the easiest assembly and are supplied with Metal Tile Roof - new generation of roofing materials.

Metal Tile Roofing Sheets
The Metal Tiles are made of zinc coated roofing steel and polyester coated on top to keep the paint safe and last longer. They combine a great look of tiles with all the benefits of metal roof. Metal Tiles are strong, weather resistant, light weight, low maintenance and easy to install. The Metal Tile roofing sheets are coming in long run and have standard fixings with roofing screws.
 
See more information at http://www.coroofs.com.au/
 
Carports with Metal Tiles
 
Our carport kits with Metal Tiles are the new generation of prefab buildings and garages. They look great on any block of land - big or small, town or rural, commercial or industrial.
 
A carport with Metal Tiles will match your existing tiled house roof and make a complement to your property.
 
Our Carport kits are made only from best quality steel and represent best value for money.
 
You can find more information at http://www.easytiledcarports.com.au/
 
 
Engineering and design
Our Carport kits are engineered with web roof truss system and designed the way you can install a ceiling and inclose the roof cavity turning it into a storage room and having a better finish and insulation inside.
 
Metal Tile Carport kits require only simple tools for the assembly because all the hard work is done at our factory.
We supply and deliver the Carport Kits in Queensland, New South Wales and Victoria.
 
Ready to assemble DIY Carport Kits always deliver stunning results.
 
Value for money
Our pre-manufactured Metal Carports Kits not only protect your vehicle from the harsh weather conditions - they add significant value to your home.
All the kits have a new generation of the metal roofs: Metal Tile roof. It combines the great look of tiles with all the benefits of steel. They look great and will be a real complement to any property.
All the carports kits are fully pre-manufactured for the easiest assembly and only a minimum adjustment on site is required.

Installation manual is supplied. It takes only simple tools to assemble the kit. We are happy to arrange an assembly if required.

Roof design makes it possible to install a ceiling and to turn the roof cavity into a storage room.

Only high quality metal steel frame sare used. Roof trusses are set at 1200 mm, roof battens are set at 350 mm, which makes the construction supper strong and suitable for even harsh weather conditions.
  A Carport with Metal Tile roof will make a perfect garage for your car.

See all the carport kits types and sizes at http://www.easytiledcarports.com.au/